- Subject Areas (615)
- Engineering (121)
- Structural Mechanics (61)
- Stress Analysis (6)
- Structural Mechanics (61)
- Engineering (121)
Number of records: 6.
NASA/TP-3554, Ahmed, R., Analysis of Stress Concentration at Holes in Components Made of 2195 Aluminum-Lithium, Structures and Dynamics Laboratory, Science and Engineering Directorate. NASA Marshall Space Flight Center, AL 35812, May 1995, pp. 32, Format(s): PDF 808k
NASA/TM-108490, Ahmed, R., Analysis of Stress Concentration in the Dutton Groove Regions of the Super Lightweight External Tank, Structures and Dynamics Laboratory, Science and Engineering Directorate NASA Marshall Space Flight Center, AL 35812Prepared by Structures and Dynamics Laboratory, Science and Engineering Directorate., May 1995, pp. 35, Format(s): PDF 903k
NASA/SP-8083, Discontinuity stresses in metallic pressure vessels, NASA SPACE VEHICLE DESIGN CRITERIA (Structures), NASA Langley Research Center (Hampton, VA, United States), August,1971, pp. 69, Format(s): PDF 5595k
NASA/TP-97-206238, Verderaime, V., Inherent Conservatism in Deterministic Quasi-Static Structural Analysis, Structures and Dynamics Laboratory, Science and Engineering Directorate, NASA Marshall Space Flight Center, AL 35812, November 1997, pp. 40, Format(s): PDF 325k
NASA/TM-209735, Fox, D.E. and Swaim, K.W., Static Strength Characteristics of Mechanically Fastened Composite Joints (MSFC Center Director's Discretionary Fund Final Report, Project No. 95-07), Structures, Mechanics, and Termal Department, Engineering Directorate, NASA Marshall Space Flight Center, AL 35812, September 1999, pp. 28, Format(s): PDF 21600k
NASA/TM-108519, Steeve, B.E., Verification of Orthogrid Finite Element Modeling Techniques, Structures and Dynamics Laboratory, Science and Engineering Directorate NASA Marshall Space Flight Center, AL 35812, October 1996, pp. 18, Format(s): PDF 260k
This list was generated on Thu Jan 17 00:10:00 CST 2008.